ITEM 0.0.294.34 Turkey authorised distributor, sensor, encoder, control device

Mounting of linear guide shafts (specifically $14 mm$ diameter) onto Line 8 series aluminum profile systems.

Creation of roller guide rails in conveyor lines, protective enclosures, or ergonomic workbench structures.

Turning standard aluminum profiles into base rails for linear motion components.

Supporting manual adjustment and sliding systems operating under light and medium load.

Providing a fast, clip-in mounting solution for shafts belonging to linear units.

You can become a member here to see prices and take advantage of other privileges.

Adet

Ask a question

Is a Shaft-Clamp Profile used for securing guide shafts with a $14 mm$ diameter into Line 8 profile grooves.

Profile is first pressed into aluminum profile groove, and then guide shaft is firmly pressed into its recess to secure it.

Made from natural anodized aluminum and is supplied as a cut-off (up to a maximum of $3000 mm$ ).

Use on "light" and "E" type profile grooves is not recommended because sufficient clamping strength cannot be achieved.

Shaft must be additionally fixed at chosen location using a $DIN 6325$ dowel pin, one per length of shaft, to prevent axial slippage.

Product Type: Shaft-Clamp Profile

Guide Type: Shaft D14

Profile System: Line 8

Material: Al, anodized, natural (Aluminum)

Colour: Natural

Cross-sectional Area ( $A$ ): $1.36 cm^{2}$

Unit Weight ( $m$ ): $0.36 kg/m$

Delivery Unit: Cut-off, Max. $3000 mm$

ESD Safety: No