info@eurosensor.com WhatsApp
GEMÜ 3030 DH WS 41 4 E M42 00 C1 FLOWMETRE
GEMÜ 3030 DH WS 41 4 E M42 00 C1 FLOWMETRE

GEMÜ 3030 DH WS 41 4 E M42 00 C1 FLOWMETRE

  • Water and Wastewater Treatment: Flow measurement of conductive liquids.
  • Chemical Industry: Measurement of corrosive and inert liquids.
  • Food and Beverage Industry: Measurement of conductive liquids in hygienic applications.
  • Pharmaceutical Industry: Precise measurement of clean and conductive liquids.
  • Pulp and Paper Industry: Flow control of process fluids.
  • Mining and Mineral Processing: Measurement of slurry and other conductive mixtures.
    • You can become a member here to see prices and take advantage of other privileges.
    Ask a question

    GEMÜ 3030 mFlow is a magnetic-inductive flowmeter that operates on the principle of magnetic induction. It is suitable for the accurate measurement of flow velocity and flow rate of electrically conductive liquids. Its simple mechanical construction allows for quick and easy installation. It features a backlit display and a front membrane keypad for operation. Electrical connections are located at the rear of the device.

    Possible meanings of some parts of the product code you provided:

    • 3030: Indicates the product model series (mFlow magnetic-inductive flowmeter).
    • DH: May indicate the housing form.
    • WS: May indicate the connection type (e.g., weld-on adapter).
    • 41: May indicate the body material (likely stainless steel 1.4435).
    • 4: May indicate the sealing material (e.g., FPM).
    • E: May indicate the sensor material (likely 1.4435/PTFE).
    • M42: May indicate the electrical outputs of the device (e.g., 4-20 mA, pulse, relay).
    • 00: May indicate no specific options.
    • C1: May indicate voltage/frequency information (e.g., 24V DC).

    The following technical details are typical for the general GEMÜ 3030 series flowmeters. The details of the specific model may vary.

    • Measuring Principle: Magnetic-inductive
    • Applicable Fluids: Electrically conductive liquids
    • Nominal Diameter (DN): Not specified in the provided code (the part after 000 might indicate the diameter range).
    • Connection Type: Specified in the product code (WS - likely weld-on adapter).
    • Body Material: Specified in the product code (41 - likely stainless steel 1.4435).
    • Sealing Material: Specified in the product code (4 - likely FPM).
    • Sensor Material: Specified in the product code (E - likely 1.4435/PTFE).
    • Operating Pressure: Depends on the nominal diameter and body material (refer to manufacturer documentation).
    • Fluid Temperature: Depends on the sealing and sensor material (refer to manufacturer documentation).
    • Ambient Temperature: Typically -20 to +60 °C.
    • Output Signals: Specified in the product code (M42 - likely 4-20 mA, pulse output, 2 relay outputs).
    • Supply Voltage: Specified in the product code (C1 - likely 24 V DC).
    • Protection Class: Typically IP 65 or higher.
    • Accuracy: Typically ± 0.5% of the measuring range.