PAVONE SISTEMI DAT 100 Weight Transmitter

Weight Transmitter: This product is used as a weight transmitter for weight measurement in various industrial applications.
Hazardous Areas: Can be used in hazardous areas with intrinsically safe barriers.

You can become a member here to see prices and take advantage of other privileges.

Adet

Ask a question

Weight Transmitter

Measuring Range: –4 ÷ +4 mV/V.
Input Sensitivity: 0.02 µV/count.
Full Scale Non-Linearity: <0.01 %.
Gain Drift: < 0.001% FS/°C.
Display: 5 digit, red LED (7 segments), h 7 mm.
A/D Converter: 24 bit.
Internal Resolution: 16,000,000 points.
Transducer Input Voltage: 4 V (max 4 cells 350 Ohm).
Frequency Signal Acquisition: 4 ÷ 123 Hz.
Visible Resolution: 60,000.
Divisions Value (adjustable): 0.001 ÷ 50.
Temperature Range: -10 ÷ +50°C (max humidity 85% without condensation).
Storage Temperature: -20 ÷ +60 °C.
Filter: 0.2 ÷ 20 Hz.
Logic Output: 2 Solid-state relays, (maximum load 24 Vdc / 100 mA each).
Logic Inputs: 2 optoisolated 24 Vcc PNP (External voltage).
Serial Port: RS232C half duplex with ASCII or Modbus RTU protocol, RS485 full duplex with ASCII or Modbus RTU protocol.
Analog Output: 16 Bit optoisolated.
Baud Rate: 2400 ÷ 115200 adjustable.
Transmission Distance: 15 m.
Analog Output Current: 0/4÷20mA (R max 300 Ohm).
Analog Output Voltage: 0÷5/10V (R min10 K Ohm).
Power Supply: 24 V c.c. ±10% – power 2 W.
Regulatory Compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security.